Heat Exchanger for Waste Heat Recovery

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: RX
• Application: Heater, Cooler, Vaporizer, Condenser
• Principle: Recuperative Heat Exchanger
• Style: Plate Type
• Material: Stainless Steel
• Customized Logo: Yes
• OEM: Yes
• Factory: Yes
• Delivery: Fast Delivery 10-15 Days
• Transport Package: Wooden Case
• Specification: Customized
• Trademark: DGXT OR OEM
• Origin: China
• HS Code: 84195000
• Production Capacity: 100000pieces/Year

Product Description

DGXT Plate heat exchanger
 

Product Parameters

Model	Corrugated angle	Center distance	Size	Corrugated depth	DN	Cleat	Splint size (W*H)
RX0.08	120°	416*86	497*168	3.0	50Inner	20mm	235*525
M6-0.15	126°	496*140	604*250	3.0	DN50/DN65	25mm	342*694
RX0.16	120	565*155	665*248	3.6	DN40/DN50	25mm	320*710
M6-1-0.19	126°	639*140	750*250	3.0	DN50/DN65	25mm	342*842
M6-2-0.25	126°	886*140	1000*250	3.0	DN50/DN65	25mm	380*1104
M6-2-0.25-SH	126	886*140	1000*250	2	DN50/DN65	25mm	380*1104
RX0.3	120	875*180	1000*303	3.6	DN65	30mm	400*1074
RX1001-0.33	120°	716*223	875*375	3.7	DN80-DN100	30mm	490*1126
RX1002-0.46	1200	1058*223	1219*375	3.7	DN80-DN100	30mm	500*1478
M10-S-0.33	57°121°	720*223	875*375	4.0	DN80-DN100	30mm	490*1126
M10-L-0.45	57°121	1047*223	1205*375	4.0	DN80-DN100	30mm	500*1478
RX1502-0.61	120°	1000*290	1219*500	3.7	DN125-DN150	35mm	610*1488
RX1503-0.75	120°	1280*290	1500*500	3.7	DN125-DN150	35mm	610*1769
M15MD1-0.45	61°123°	698*298	906*500	4.0	DN125-DN150	35mm	610*1153
M15MD2-0.55	61°123°	897*298	1105*500	4.0	DN125-DN150	35mm	610*1352
M15MD3-0.70	61°123	1195*298	1403*500	4.0	DN125-DN150	35mm	500*1647
M15M-0.75	61°123°	1294*298	1502*500	4.0	DN125-DN150	35mm	610*1746
M15BD-0.61	70°130°	1012*298.5	1220*500	2.6	DN125-DN150	35mm	610*1448
M15B-0.75	70°130°	1294*298.5	1502*500	2.6	DN125-DN150	35mm	610*1746
Model	Corrugated angle	Center distance	Size	Corrugated depth	DN	cleat	Splint size (W*H)
RX2001-0.75	120	970*345	1234*610	3.7	DN200	40mm	735*1576
RX2002-1.08	120°	1515*345	1778*610	3.7	DN200	40mm	735*2126
M20MD-0.94	49132°	1229*353	1500*625	4.0	DN200	40mm	736*1764
M20M-1.1	49132°	1479*353	1750*625	4.0	DN200	40mm	736*1994
T20BD-0.96	70°126.5°	1267.5*353	1540*625	2.0	DN200	40mm	756*1744
T20B-1.1	70°126.5°	1478*353	1750*625	2.0	DN200	40mm	756*1994
RX2501-1.06	120°	1096*436	1415*750	3.7	DN250	45mm	870*1765
RX2502-1.33	120°	1451*436	1772*750	3.7	DN250	45mm	870*1260
MX25D1-1.0	56120.5°	1013*439	2252*750	4.0	DN250	45mm
MX25D2-1.34	56120.5	1476*439	1789*750	4.0	DN250	45mm
MX25M-1.69	56120.5°	1939*439	1326*750	4.0	DN250	50mm
MX25B-1.69	127.5	1939*439	2252*750	2.6	DN250	50mm
RX3002-1.55	120°	1385*480	1772*868	3.7	DN300	55mm	1062*2132
M30A-1.5	67°127°	1085*596	1493*1000	3.4	DN300-DN350	60mm	1129*1860
M30B-1.86	67°127	1446*596	1854*1000	3.4	DN300-DN350	65mm	1129*2200
M30C-2.3	67127°	1842*596	2250*1000	3.4	DN300-DN350	70mm	1129*2600
TL35S-2.57	128	2178*578	2591*991	7.5	DN300-DN350	80mm	3000*1200
T45A-2.6	60°118°	1528*720	2060*1250	4.0	DN400-DN450	80mm	1430*2440
T45B-3.2	60118°	1998*720	2530*1250	4.0	DN400-DN450	90mm	1420*2970

Working Principle of Format Heat Exchanger
The plate heat exchanger is composed of a group of corrugated metal plates with holes on the plates, through which two liquids for heat transfer pass. The sheet metal is mounted in a frame with a fixed plate and a movable compaction plate on the side and clamped with clamping bolts. A sealing gasket is mounted on the plate to seal the fluid passage and guide the fluid to flow alternately into the respective passages. Fluid flow, physical properties, pressure drop and temperature difference determine the number and size of plates. The corrugation of the plate not only improves the turbulence degree, but also forms many supporting points, which can withstand the pressure difference between the media. The metal plate and the movable compaction plate are suspended on the guide rod and positioned by the lower guide rod, while the end of the rod is fixed on the support rod, but if one or two liquids pass through the heat exchanger more than once, the interface should be opened on the fixed plate and the movable compaction plate. In most cases, the use of one-way, all pipelines are connected to the fixed pressure plate, check the removal of heat exchangers, do not have to remove the pipeline.

Features
1High heat transfer efficiency           
2Safety and reliability in use           
3Small area and easy maintenance           
4 Adjust to changing circumstances           
5Less resistance loss            
6Favorable for the Utilization of Low Temperature Heat Sources

FACTORY SHOW

Detailed Photos